With the advent of the information society in the 21st century, the high-tension special alloy screen mesh for producing Micromesh came into existence based on our longstanding research and accumulated weaving technology. Micromesh has played an active role in cutting-edge manufacturing processes for semiconductor products and plasma displays, where increasingly higher precision and higher grades are required.

Micromesh uses high-strength extra-fine wires made with our special manufacturing method, and thus we have achieved a high-strength screen with a high opening and high aperture ratio.

Micromesh 300-20 High opening 68 High aperture ratio60%

---

Comparison of 20 wire strength and elasticity

		This is a high-strength, durable screen without yield points and settling using stainless steel special alloy wires based on our special manufacturing method.

The development of new wires enabled us to produce this screen, in which a high opening and high aperture ratio are combined with high strength.

Comparison of the strength of various types of fibers

The weaving wire for Micromesh is about 3.5 times stronger than regular stainless steel and 1.2 times stronger than high strength stainless steel. Our company's weaving technology enabled us to develop a screen tougher than ever before and without any settling or permanent set-in fatigue.

---

Micromesh has a high opening and high aperture ratio, which can achieve extremely excellent paste passage ability. Of course, the antirust ability is equivalent to that of stainless steel.

Comparison of openings (line width 100 )

Micromesh　 300-20 paste printing (line width 40 )

Micromesh's high reproducibility enables our customers to widen the field of screen printing and achieve further high-precision printing.

---

This is a high-strength, durable screen mesh with excellent plate wear ability in which the characteristics of the base wire are fully applied.

Testing method :		Testing method: JIS L 1096-1999 (Labeled Strip Method)
		Testing machine: Shimadzu Autograph AC-500B
		Gripping distance: 20cm
		Test specimen width: 5cm
		Tensile strength: 10cm/min

---

Micromesh makes it possible to directly mount a mesh screen with high strength, durability, and high tension. It has excellent stability without any significant drop in tension after separation.

For a high strength type where it is difficult to mount directly, it is possible to adequately mount screen mesh directly even at 0.6 mm; moreover, there is no significant drop in tension after separation.